ZKTeco F7C Access Control
ZKTeco F7-C is an IP based fingerprint terminal with both Network and Standalone operation modes. It is connectible with ZKAccess 3.5 software for access control and time attendance management. With Wiegand output, F7-C is flexible to connect with ZK or any 3rd party controllers as a slave reader.
The ZKTeco F7-C is an IP-based fingerprint terminal that can operate in both network and stand-alone modes. It can be used with the ZKAccess 3.5 software for access control and time attendance tracking. With Wiegand output, the F7-C can be used as a slave reader with ZK or any other third-party controller.
Wiegand input configures two F7-C units to employ the Master & Slave solution, allowing users to verify their identities at both the entrance and departure. To increase security, the anti-passback function is also enabled. The SF400's auxiliary input port allows it to connect to a secondary source, such as a smoke detector or an emergency switch. The device generates an alarm signal and unlocks doors in the event of an emergency after the linking function is engaged through the machine menu.